Installing a front license plate holder with pop rivets instead of the usual screws may not be such a difficult task but it can actually be a tricky job. Guitar Guru Files Mgtf on this page. If you are not able to install it properly, the license plate could come loose while you are driving on the road and become a hazard which can be dangerous for other road drivers. Fight Night Champion Keygen Download Softonic. You may also get a ticket and fined heftily if you are pulled over by a mobile patrol for lost license plate. Pop rivets are better than screws because they are not turned loose by bumps and vibrations which are normal in driving a vehicle.

I went to my local lowes Hardware sdtore and found licence plate mounting screws with square. GTI Rear License Plate Mounting. VWOC Images / Video; Vendors. Decra Certified Installers Utah. Installing a front license plate holder with pop rivets instead. If you are not able to install it properly, the license plate could. Fastener & Nail Hardware.

You do not have to hire professional help to do it since you can do the job yourself. Step 1 - Checking on Requirements Before installing a holder for a front license plate, check on the Department of Motor Vehicles office locally if you are required to have a front license plate in the state you are in. Most jurisdictions require a front and back license plate but it is safer to check first to avoid incurring a violation. Step 2 - Removing the License Plate Remove your license plate by locating the two screws that are on top of the plate and unscrewing them with a screwdriver. Step 3 - Fitting the License Plate Holder Once the license plate is removed from its mount, slide it into position inside the holder.

There are usually two holes found on top and bottom of the holder. Mark their positions on the license plate. There are other styles of license plate holders that may have attachment holes on other parts of the frame. Mark their positions on the license plate as well. Step 4 - Drilling the License Plate If your license plate does not have holes that align with the holes found on the plate holder, you will have to drill it using an electric drill. The size of the bit to use should be the same as the size of your pop rivets. Step 5 - Fastening the License Plate Insert your pop rivet into the rivet gun and align the holes on the license plate with those on the license plate holder.

Put the rivet in position and squeeze on the rivet gun handles until the rivet shank breaks off. This will usually mean that the rivet has been compressed enough for a proper joint. If not, drill through the rivet to remove and refasten with a new pop rivet. If the hole has been made larger due to the removal of the previous rivet, use the next rivet size as replacement. Step 6 - Checking the License Plate Holder Rivets Always check all the rivets that you have attached to ensure a perfect joint. This is to make sure that the plate will not come off its holder at the wrong moment. Step 7 - Reattaching the License Plate to Your Car Once you have ensured that the license plate and its holder have been properly fastened together, place it back to its position with screws.